Reply to thread

Message

<blockquote data-quote="1FstFormulaV8" data-source="post: 4250902" data-attributes="member: 571529">I am installing a Kenwood H/U. The vehicle has a JBL premium sound system. I&#039;ve been told I have to get a bypass harness. I did some ivestigating in the car. It seems the previous owner already had a aftermarket H/U intalled. When I got the car it was completely ripped out. There is an amplifier bypass harnes on the vehicle.<img src="http://inlinethumb11.webshots.com/27978/2021336130053300235S600x600Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />I&#039;ve read that I do not have to use the wires that are exposed. There is normally a square plug there.Though, this cable is attached to the rear bypass harness. It reads..Front L -, Front L +, and so on. So I know it&#039;s that cable.<img src="http://inlinethumb01.webshots.com/42176/2430441610053300235S600x600Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />As you can see here...the gray cable and the harness are connected.<img src="http://inlinethumb58.webshots.com/42233/2796347360053300235S600x600Q85.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />There is another connecter under the dash board that&#039;s suppose to go to the speakers. I&#039;m totally confused now. I went to purchase a wiring harness. There are 3 connecters in the package. 1 has the H/U wiring leads which connects to the plug in the first photo. The second connector goes to the gray wire that has the exposed the wires. And a 3rd. That I have no idea where it goes. Guessing it&#039;s one of these two. I&#039;m now totally confused. Should I just connect them al?</blockquote>

[QUOTE="1FstFormulaV8, post: 4250902, member: 571529"] I am installing a Kenwood H/U. The vehicle has a JBL premium sound system. I've been told I have to get a bypass harness. I did some ivestigating in the car. It seems the previous owner already had a aftermarket H/U intalled. When I got the car it was completely ripped out. There is an amplifier bypass harnes on the vehicle. [IMG]http://inlinethumb11.webshots.com/27978/2021336130053300235S600x600Q85.jpg[/IMG] I've read that I do not have to use the wires that are exposed. There is normally a square plug there.Though, this cable is attached to the rear bypass harness. It reads..Front L -, Front L +, and so on. So I know it's that cable. [IMG]http://inlinethumb01.webshots.com/42176/2430441610053300235S600x600Q85.jpg[/IMG] As you can see here...the gray cable and the harness are connected. [IMG]http://inlinethumb58.webshots.com/42233/2796347360053300235S600x600Q85.jpg[/IMG] There is another connecter under the dash board that's suppose to go to the speakers. I'm totally confused now. I went to purchase a wiring harness. There are 3 connecters in the package. 1 has the H/U wiring leads which connects to the plug in the first photo. The second connector goes to the gray wire that has the exposed the wires. And a 3rd. That I have no idea where it goes. Guessing it's one of these two. I'm now totally confused. Should I just connect them al? [/QUOTE]

Verification