Reply to thread

Message: <blockquote data-quote="PatFitz9" data-source="post: 1491113" data-attributes="member: 563492">I am thinking of building a sealed box for my new 18xxx.  I am just assuming that the driver displacement is .2 cubic feet.  RE recommends 4.2 cubes for a sealed box.  so i am shooting for 4.4 total cubes right?  to get ~4.4 cubes I found 22x23x15 (HxWxD) inches.  that needs to be the inside numbers right?  using 3/4 MDF that would be 23.5" tall 24.5" wide and 16.5" deep outside dimentions.  am i going to need to brace the box?  if so, how should I do that?  and are those numbers correct?also, I am planning on using wood glue for the panels.  do i need to use another sealant, caulk perhaps?  and should i coat the inside of the box with anything?  if so, what should i use?  thanks for the help.</blockquote>

Top