Reply to thread

Message: <blockquote data-quote="Fakecodename47" data-source="post: 7260418" data-attributes="member: 631427"><p>Coils are each reading 1.5 when tested by themselves. If wired in parallel its reading about 0.8. I also just ran my positive on my meter to the positive on the one coil and the negative from the meter and the positive of the other coil and still got 1.5 ohms. I did the same thing with using the two negatives as positive and negative and got 1.5. so even if I only wire the two negatives its reading as 1.5 ohms. I have continuity between all four terminals.</p></blockquote><p></p>

Top