Reply to thread

Message

<blockquote data-quote="mrray13" data-source="post: 738062" data-attributes="member: 540942">the 3/4&quot; will be plenty...all this double baffle and double wall stuff is only good to gain u a tenth or so on a mic. u will only need to brace long stretches. u won&#039;t have to brace the hell outa it, it&#039;s a waste of time, especially with just 1kw of power. ur not going to flex the box enough to ever matter in a daily.the 5.7ft^3 box i built for a 18&quot; solo x had two braces...and those were to just support the weight of the sub. otherwise, the 1&quot; mdf i used would have been plenty.33in^2 of port should be plenty for ur twelve, that&#039;s about all i ran for a 12&quot; xxx and the 12&quot; memphis mojo i have now.good luck man..sounds like u got a good plan going!wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee //content.invisioncic.com/y282845/emoticons/peace.gif.2db28b618ed8d1964ebbe2f5021d2c39.gif</blockquote>

[QUOTE="mrray13, post: 738062, member: 540942"] the 3/4" will be plenty...all this double baffle and double wall stuff is only good to gain u a tenth or so on a mic. u will only need to brace long stretches. u won't have to brace the hell outa it, it's a waste of time, especially with just 1kw of power. ur not going to flex the box enough to ever matter in a daily. the 5.7ft^3 box i built for a 18" solo x had two braces...and those were to just support the weight of the sub. otherwise, the 1" mdf i used would have been plenty. 33in^2 of port should be plenty for ur twelve, that's about all i ran for a 12" xxx and the 12" memphis mojo i have now. good luck man..sounds like u got a good plan going! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee [IMG]//content.invisioncic.com/y282845/emoticons/peace.gif.2db28b618ed8d1964ebbe2f5021d2c39.gif[/IMG] [/QUOTE]

Verification