Reply to thread

Message

<blockquote data-quote="outsideshot23" data-source="post: 7272794" data-attributes="member: 616457"><p>you have no idea man.,.. i have had SEVERAL 2k-8k systems.. and when you get into multiple alts, multiple amps, hundreds of feet of 1/0 you will run into problems and you will run into problems you never thought about i guarantee you.. i have had tons of problems...&nbsp; Had to notch out floor of the box to get it back far enough to get enough airspace, had to rmeove idler pulley get some flathead bolts drill and retap new holes to get my bracket to work, had to make my own fuse attachment to get alts hooked up, had ot buy a maxxlink and osope to get 4 amps strapped and working properly which i have nevrer had to deal with, thought i would just run all my wires along the frame(wrong), good luck finding a place to run a softball size run of wires where they are not in any pinch points or in a dangerous position, im going to have to hook up and run a vcm, multiple custom buss bars, one of my subs was out of phase, imp rise... etc etc etc.. it goes on and on.. and that just scratching the surface of my built in a full size witht he entire bed to use.. Its never ending.. that much power and that many wires.. i probly got over 700&#039; of wire... you are going to run into unexpected problems and you have to be careful where tou wire this or that or run the wires so you done get a short and lose a couple k quick</p></blockquote><p></p>

[QUOTE="outsideshot23, post: 7272794, member: 616457"] you have no idea man.,.. i have had SEVERAL 2k-8k systems.. and when you get into multiple alts, multiple amps, hundreds of feet of 1/0 you will run into problems and you will run into problems you never thought about i guarantee you.. i have had tons of problems... Had to notch out floor of the box to get it back far enough to get enough airspace, had to rmeove idler pulley get some flathead bolts drill and retap new holes to get my bracket to work, had to make my own fuse attachment to get alts hooked up, had ot buy a maxxlink and osope to get 4 amps strapped and working properly which i have nevrer had to deal with, thought i would just run all my wires along the frame(wrong), good luck finding a place to run a softball size run of wires where they are not in any pinch points or in a dangerous position, im going to have to hook up and run a vcm, multiple custom buss bars, one of my subs was out of phase, imp rise... etc etc etc.. it goes on and on.. and that just scratching the surface of my built in a full size witht he entire bed to use.. Its never ending.. that much power and that many wires.. i probly got over 700' of wire... you are going to run into unexpected problems and you have to be careful where tou wire this or that or run the wires so you done get a short and lose a couple k quick [/QUOTE]

Verification