Reply to thread

Message: <blockquote data-quote="diggitydigs" data-source="post: 7402207" data-attributes="member: 634574">Thanks for the replies.... Im running 4 AWG wire to the amp, its only one amp, 1300 max at 1 ohm, running two 2 ohm 12" subs bridged to 1 ohm, a 60 amp fuse is inline after the battery. Did the big 3 with 4 AWG wire - before everyone chimes in and tells me that I need 0 AWG - I plan on doing this in a couple days but was told if Im only running 4 AWG for power than 4 AWG for the big 3 is sufficient. Recently added an Optima yellow top battery and it has helped considerably but still dimming a bit....I think I will be getting the volt meter out and see what kind of readings Im getting and report back.</blockquote>

Top