Recent content by zorak46and2

it's a task taking the back speakers out of a old body style chevy, i would go ahead and pay somebody who has done it a hundred and fifty times than doing it for the first time myself there are quite a few things you can break and if you screw just one thing up you get those annoying rattles, if...

use the 250 and break the ohms down

why not buy a bass cannon almost all the well known manufacters make them i had a fosgate 8 cannon and it was pretty ****ed loud (for an 8 or a 10)

how the hell did you figure out that it's flamible, other than the " warning contents extremely flamable " label on the outside, or was it a personal experince

yea use either rockford's power series or audiobahn, they're not too expensive and if you want them really cheap just go to ebay and there is always somebody that has to get rid of their amps

get a tonnaeu cover and put them in the bed facing the tail gate build the box much like that other guy was saying and build into the truck, like he said make the subs as close to the ground as possible, then route all wires, don't install the subs yet, take your truck to the ford house and get...

go down to lowes and buy a product known as liquid nails it works wonders on cracks and air leaks, just don't get to crazy w/it and whatever you do let it dry for a day at least before installing it into your vechile, cause it does reek

rockford's instuctions are pretty well incrypted they only want dealers working on their merchandise, but from glancing at your specs they look alright, but i would not actually know for 100% unless i saw the box and the way you are building it.i would go with 35 and if you really don't know...

or even better get the seal specs for the speaker and go down to the hardware store and ...........................get a pvc pipe and cut it to regulations and put a capper on the end for th 6.5's, and for the 6x9's buy a flange big enough to fit over the bottom then use silicon to seal it, i...

if you don't have much money go ahead and get the jensen, i think the 400 is like 180 dollars right, but i would go with an audiobahn, or maybe a rockford (at least their amps are still good)

simplily call honda, and talk to their electrical man, or even smarter go down to a performance shop and ask them to get you a better alt. TELL THEM WHAT IT IS FOR, because they could find one that is better suited for your amperage needs.

right on basspimp, took the words right off my key board

audio bahn would be the one of the best bang for ur dollar type speaker, and since you can get 2 in a presealed factory box, i would think that would be even better, after i burn up my rf's (probably next week) that is going to be my next buy.....

you might be able to run it w/ the 500 just break it down to 1 ohm, may not be the best but it'll work until you can find something better

yes just extend the wire but do not make them too long and make absolutely sure that you do not have any bare spots on it when you install it