Recent content by Youhearthat?

So any updates? What will you be replacing the stock subs with?

You need a new alternator or a HO one.

Guys how do you turn on the auto EQ future in this decks? I have the mic I suppose you connect it in the AUX and then press a button and the HU should start playing static and Auto eq and time alingment, how dou you start this procedure? Thanx JC

Problem is fixed now, there was something near where I put my crossovers that was causing interference, probably the gas pump or something like that, but whats weird is that they have been in that same spot before and never pick up any noise, what I dint like is that my equipment is not very...

bump

so 8 vs 4 gauge on this amps I should go with 8 gauge? for power and grounds

its picking noise from the ground wire itself... how can it have gone bad? and how do you correct it? thanx!

The 8gauge wire will be about 5 feet long each of the 2 grounds and 2 power... so is it ok then? I havent bought the wire, so wich will be most suitable 4 or 8?

why bigger grounds?

AMPs Boston GT-40 2x25amp Fuses Boston GT-22 2x20amp Fuses 4 gauge to dist. block and from there 8 gauge power and separate 8 gauge grounds.

its the crossovers, they do this noise but only near ground wires anyone can explain why only on grounds but not on powers?

bump...

No, sorry what I meant is that when I crank the car the noise starts a bit louder and then quiets down a bit when the engine is fully started. Also another thing... Can the ground wires generate noises too by this I mean the ground wire itself passing near a crossover?

NEW INFO********* I unplugged the wiring that goes amp to the tweeter crossover and guess what? The noise is still there... specially when I turn on the car... any advice? could it be the power cable that is pretty close to the tweeter ? how far away should it be? Thanx! oh and the tweeter...

speaker wires, rcas and power cables they all run separately, so you guys think that moving the crossovers might help? the tweeter crossover is pretty close to the fuse casing and power cables tought. because they all come toghether in the amp rack.