Recent content by waxstaff

I will keep an eye on the volt meter, when i see the voltage dropping ill ease off its probably not to good for the other components in the car too . Ill have a look kinda hard to squeeze under there but if this is something i can do myself it would be nice, the car tbh is not worth spending...

Okay ill get some 0 gauge on payday then i presume 4 gauge is not enough. Ill probably have to get someone to do the alt to pos on battery for me then. Amp bass boost set to 0. Min value -12 max value +12 Deck bass boost set to 0 Deck Sub Gain set to 3. Min value -10 max value +10 Loudness...

Yep at the moment it is on 0 i can turn it down more but thats going into minus levels so im not sure if thats what they ment. The bass on the HU is set to 0 and the subwoofer level is about 3 out of 10. I have done 1 of the big 3 i put a 4 gauge from the negative on the battery in the front to...

Okay ill turn the bass boost to 0 what does this actually do? will it prevent the clipping allowing me to put more power through it? Thanks for all the responses so far guys!

Yes usually when its dropping by .5v you can start to hear nasty bass coming from the boot.

The bass boost is set to 0 halfway it can go to -12db or +12db so i presume this would be on?

Hi Guys, I have read up on amplifier clipping and im a little confused applying it with my current setup ill start by briefly explaining my system: 2 x Vibe Space 1000RMS each 2Ohm VC's   MTX Thunder - 1500RMS at 1Ohm   There is an extra battery in the boot too 4 gauge wiring all the way...

Hey Hey Guys, Im Andy from england starting to get into more serious car audio. Have purchased an amp that is way above power levels i have used before! Hopefully i can get some sick bass out of my system with the stuff i can learn from this forum.