Recent content by V8SRSLO

using your outside measurments with .75 mdf. I get a net of 7.45cu/ft with ports and sub in, a box tune of 31hz, 7.59sq/in of port per cube which is on the low side. me personally I would aim for 14sq/in of port or more per cube.

there are a few build threads ive seen with that done. I havent looked to see the rules here about linking other forums, so i wont post a direct link but search google for " BERYLLIUM BMW 323ci ". that is a beautiful job done forming the wheel well.

The exact person or place I cannot recall, I used to be in big into audio comps 20 years ago, thats when I heard that. I currently own a car performance shop and over the last year have been getting back into the audio scene. Things change with time, maybe it doesnt matter anymore due to the...

Chop mat and resin will build up fast and is pretty strong. Is the box going to have to be built in the car to make the space req?

some subs are like people and dont play well with others so they should have seperate chambers. iirc you can use to thiele par. to tell if subs will be ok in common chambers. I normally just ask the build company

you could use fiberglass, then staple some felt to the wood in your box and resin it to make the transition.

Room isnt an issue im just looking for the best output from 2 DC xl18m2's. they currently reside in a regular ported box. 11.34^3 net volume, tuned to 36hz. The in cab peak is 43hz sealed, offical TL 150.2db on a clamped 2700 watts. I would like to get more out of them so I wanted to try my...