Recent content by Thunderturkey96

So I metered the amps inputs and got less than 1000 ohm of resistance so it looks like I need some shielded rca cables. Does anyone have any recommendations for a good set shielded coaxial style rca cables of good quality?

My only thought is my phone is such a low output that it may be covering it up vs the head units pre outs.

I also metered the rca grounds on the back of the radio and my pico fuse in the radio is still working fine so grounding rca’s to the radio chassis shouldn’t make any difference.

So yesterday I have removed and cleaned all grounds to shiny bare metal, added a new 12ga ground to the existing ground in the dash for the radio Which is the only ground I found that metered on the high side of things, used my multi meter to test my rca’s they are all good, Tested all my...

Right Right on I thought it would be a waist of time but figured I would at least ask and see if anyone else has tried it with any success

So my buddy at work says that I should run both power and ground for the radio directly to the battery with 12 ga any thoughts on this/ would it be a good idea to do so in my case???? Or would running a 12 ga ground only be just as good?

I am using Rockford fosgate twisted pair rca’s

So I got home got some Y splitters and a AUX jack to headphone jack adapter plugged it all in Directly at the amp and the buzz is gone! But I already tried different RCA’s that I just plugged in at the amp and into to the back of the radio ran them over top of the carpet quick and it made the...

Yes I should easily be able to do that I will try it tonight when I get home from work and report back 👍

Yeah no engine running with just having accessories on it still does it, my power and rca’s are ran on opposite sides of the car. The amp is quite old but didn’t have any issues with it the last time it was in this car on my old setup. But it sat around for almost a year before I got around to...

So I just got done doing a bi- amp set up in my 95 ford thunderbird. I have a 80prs radio, a kenwood X-542 amp on Audison Voce components for mids and highs. I’m using the crossovers in-line on tweeters, and I have a crescendo bc2000d @ 2 ohm on a Rockford T1 sub. The problem I’m having is I...