Recent content by thedivision

Thanks guys.

Hi all, I currently have a 4 AWG wire going from my battery to the trunk. I'm about to install my new Kicker amplifier and I'm wondering if it'll be sufficient. I also have a CarPC which pulls 90 watts (max), so I will need a distribution block to power both. The Kicker manual calls for a 4...

PM'd

This is from my JVC KD-DV deck. This is the side of the harness that doesn't plug into the deck. I'm looking for a couple of these connectors.

Is the enclosure type/design feasible? ... so long as the end of the port is 6" away from the walls/driver? Pic of the sub for fun.

The port is not to spec in the diagram. It should be 5"x7.8"... is that still not enough? This is going into a Lexus LS400, and there is plenty of trunk space. The reason the port is facing the opposite direction is because there is a hole in the rear deck (where the stock subwoofer was). A...

Hello, I'm building a box for a RE SE15. 34 hz 4 cu ft ported - 5" diameter - 7.8" length I need the port to fire in a hole in the rear deck (hence the placement) also be able to slide in the trunk. Please let me know if it will work without producing excess port noise. Also, is the...

Thanks a lot. By the way, what's a subsonic filter?

Also, any cons to buying used amps as long as they are in proper working order? Thanks for the quick responses.

So I'm assuming this guy doesn't know what he's talking about...

So it will still support my sub/box thats tuned to 34hz? I don't have to adjust anything on the amp to 34?

I'm about to buy a Kicker ZX750.1 mono amp for my 15" RE SE15. The box will be ported and tuned to 34hz. Kicker specifications say "Frequency response: 20-200 Hz" and "Crossover frequency: 50-200 Hz" Pictured here: Does that mean I can't run it with my sub/box properly (tuned to 34hz)...