Recent content by sweety

Thanks Shredder2, that port is going to eat up to much enclosure volume then my other option is to use a 4" pipe even though pvc pipe is costly here in the UK, if I wanted to tune to 35Hz I think the pipe needs to be 11.5-12" long ? but not sure what the enclosures volume would be using the pipe

I'm planing on building a new box & was hoping someone could check over my plans to see if I have calculated it correctly. It's going to be a wedge shape so it fits up against the back seat so I get as much room in the trunk as possible the aim is for 1.9ft^3 & tuned to 35Hz Width 35"...

Port will be shorter not longer if your wanting to tune hiegher

Not sure how well that seam sealer will work as a sound deadener as it's flexible

I'm not enclosure designer by any means but looking at the spec's i'd say a 2.5FT^3 enclosure would be fine for them have a look on here *OFFICIAL* Free Ported Box Plans (56k NO!!) - Dodge SRT Forum

Fantastic & many thanks as that should work out ok then if it's 2ft^3 & tuned to 33 Hz

No one:confused:

Have a look at this *OFFICIAL* Free Ported Box Plans (56k NO!!) - Dodge SRT Forum sorry can't help with your other Q's

Thanks for the help so far guy's, I've tried using winISD but just can't get past adding the driver spec's in as it never seems to save them:( maybe i'm just getting to old for this. I've had a go at trying to work it out on paper but not sure if i've worked it out right or not but here go's...

Even if the slot port width & total length of the port were the same ?

Many thanks, i've used that a few time when building enclosures for myself & for my Son's last build 3x 12" subs in his old car & been happy with the results as i'm no enclosure designer but have only used round ports before but this time I think he's wanting a slot port which is harder...

Cheers came across that last night, If I changed the depth & hight over (say the depth is 18" & hight is 14" & changed it to 14" depth & 18" hight) would the port tuning still be the same ?

Hi guy's, could do with a little help on what would be the best size ported enclosure for a 12" Pioneer Ts-W305 sub spec's here = http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/126763076TRD1215-A.pdf It states a 1.65ft^3 enclosure but am I right in thinking this is the min size...

Got Cooper AT3's on my truck & have been pleased with them & they are wearing very well

Cheers guy's for the advise, the cable is about 24" long from the amp to the sub