Recent content by SteveKB

  1. S

    Noob Installer, PLZ Help

    Would this help with the heat problem at all? I mean im only getting like 5 minutes of playtime before it cuts out, and I don't even have it loud. Gain is at 12'Oclock, Bass Boost is 0, LPF is on.
  2. S

    Noob Installer, PLZ Help

    WOOT! I got it working. I re-grounded everything to different locations for the 2nd time, and this time it worked. Now I only have 1 more issue, anyone have any tips for keeping the amp a little cooler, because I cant have it bumpin to long because it gets to hot, I mean like to hot to touch...
  3. S

    Noob Installer, PLZ Help

    Funny you mention that, I had the same idea, there is a car audio shop not far from my work and I took it by there at lunch and had them test the Amp and it works fine, so the problem lies in my wiring somewhere.
  4. S

    Noob Installer, PLZ Help

    I'm thinkin a Alpine V-Power MRP M650 Or a Kenwood KAC-9102D Thoughts?
  5. S

    Noob Installer, PLZ Help

    I guess im going to try another amp, I took somemore readings today and everything is reading right on the voltages until the REM wire on the amp is hooked up. The amp light is real bright for a second when its hooked up then dims as the voltage drops from 13ish to 7.6v New amp sound like the...
  6. S

    Noob Installer, PLZ Help

    Remote wire secure, no sub options on headunit.
  7. S

    Noob Installer, PLZ Help

    I've got a charger yes, the Amp was powered up at the 7.6V level, light on and all.
  8. S

    Noob Installer, PLZ Help

    A good idea, which I tried to do and rule out the equip as the prob, but when I do this I get no power to the amp using the other car's battery. Also the batteries on both cars are only a few months old. So fustrating.
  9. S

    Noob Installer, PLZ Help

    Ok, gotcha. do you think that will solve the voltage drop issue? And is the voltage drop the reason I get nothing out of the speakers?
  10. S

    Noob Installer, PLZ Help

    Please elaborate on "the big 3" upgrade
  11. S

    Noob Installer, PLZ Help

    Any comments on my DMM results? Do I need a new Battery/Alternator combo or somethin? I'm confused.
  12. S

    Noob Installer, PLZ Help

    Ok this is interesting, With the car idle, I get about 12.7V on the DMM, when I turn the key to get power to the radio, it drops to about 7.6V!?!?!?, the reading on the REM wire is very simular to the 7.6V as well. I then started the car, the readings remained unchanged from about the 7.6V mark...
  13. S

    Noob Installer, PLZ Help

    Tried that as well, I either get nothing or the random low volume sound again. I'm going to eat then take some readings from the DMM and reply my findings.
  14. S

    Noob Installer, PLZ Help

    All fuses unblown, all new equipment except the 6 mo old headunit.
Top