Recent content by ryanthie

Probably won't notice much difference between them. And the Soundstream is better quality IMO

The reason I suggested the Crescendos is for the quality you do get for the price. But they're only available in 6.5's for the Mezzo series.

It wouldn't work, it would be like taking the speaker wires from say a left and right output and trying to power one speaker. It would just short out because you're putting two outputs together. What you're trying to do, in a sense, is bridge the RCAs and it doesn't work that way.

Any reason the Quick Links on the left side of the page are all in another language while the rest of the page is in English?

Switching one more than likely wouldn't make a noticeable difference and you'll just have mix matched subwoofers. I'd just stick with the two Kickers rather than one of each

I'm surprised nobody responded to this... I have a set in my car. They sound incredible. I ordered mine from Sky High Car Audio. They gave me a better price than going straight through Crescendo, too. I'm going to be ordering a second set to put in my car, and probably going to put a set into my...

The Phoenix Gold Elite series 6.5 components sound nice really nice, a buddy of mine has a set in his 350z. The Crescendo Mezzo 6.5 components sound great too, but the tweeter is really deep so I'm not sure if it would fit in a factory location

Yes, I plan on doing my doors with what I don't use on the trunk. I don't get any actual visible roof flex that I know of. But when I get the deadener in the trunk, it might. My trunk flex is retarded. Feel like the **** lid is going to fall off

I ordered 40sq ft of AT 80mil. So I have plenty. And I don't really think using a bit more to be "wasteful" to the guys that have said that. I have an 18" firing up, port firing into the driver side. I want to get it done right. I'll start with the flat areas and add more as needed and...

Getting rid of metal on metal rattle Most of my lid has flat surfaces and the only rounded areas aren't too large really. Though knowing that will save me deadener to put in my doors though.. bottom of my trunk has quite a few rounded areas.

Yeah I figured as much, just making sure so I don't waste deadener. Should I also put deadener over the hole as well or just on the metal?

I know you should deaden as much as you can, but I have a little question about my car. '03 Protege. It has spots in the trunk lid that are gapped for license plate lights and bolts. Question is, should I deaden the metal inside the gap where I can reach, or will deadening over the holes be...

Loud and boost are both off. I'll try backing off the gain and see if that helps me at all.. I just think it's weird that it's only one speaker doing this, the driver side doesn't have any popping sound whatsoever.

I have the HU set at 100hz I believe, and the amp's HPF isn't adjustable, it's 80hz. If the high pass on the HU affects the RCAs I can set it to as high as 150.

I'll have to vote for Obsidian, though I have no experience with RE.