Recent content by runningame21

the test light comes on when I touch the power to the red and the ground to the black, And it also comes on when I touch the remote to the red and the ground to the black. Sorry to confuse.

The subs are 600w max each, and I have them wired to a single 4 ohm load, bridged on the 500a2. I simply a accessory light to test the power, and the light turns on when I touch it to the power and ground, AND remote wires on the amps. So I know there is power there. I dont have a tool to...

Ok, I got two new amps, a fosgate 500a2, and a fosgate 200a4. I wired everything up perfectly, and am running 2 12 HE2's. Everything worked great the first two days. Then the amps were turning off by themselves, intermittently. Turn on for about a minute, then turn off for a minute. It has...

Yeah, my box is 39" x 16" x 20", and I used only one sheet of MDF.

I can design one for you, if you can get me the dimensions of how big the box can be. Now, it takes time to design a ported box, especially with having to tune it, so I do charge $5 to do it. Its up to you. -Stephen

I could use the fosgate 10. Considering the cut, and that it is only a he, how much would u take. It would be good to go in my wifes car.

yeah, paypal is to runningame21@yahoo.com and I will have to plans ready shortly.

below .10 is usually what I hear is best for the mach. Mine is at .04. The L shaped port can be measured the same as a straight port. If the box is 20". and you need a 30"port, then the L wiould be 20" on one side, then 10" on the other. Its quite simple. DONT FORGET TO FIGURE IN PORT...

Send me some pics, I might be able to take em off your hands. runningame21@yahoo.com

I want the cap, check your PM

hate to break it to ya, but you are not going to get that much for HE2's. Might as well take your losses.

Im guseeing you've never done vented box building before. You have to tune to the correct frequency, and the bax has to be bigger. How big is the box you have? How big is each chamber? Why the F*ck are you using Volfencrap's. Neways, a little more info, and I'll see ehat I can do.

Alright, Ive got plans for a box, tuned to 35Hz, one port, If you want it, I could use that 5 bucks for lunch Let me know.

Sure, Ill design one. Where do you want the port? Do you want the sub centered with two ports on either side, or off center with one port? 3/4 mdf, or 1 inch?

the name says it all. See this link for more info on the quality of sony xplod http://www.explorerforum.com/forums/showthread.php?s=&threadid=95985