Recent content by pj_chevy03

1.5 x 1.5 = 2.25 2.25 x 3.14 = 7.065 sq. in.

My friend has an 89 chevy pickup and asked my opinion on putting a cd changer in there. I didnt get a chance to take a look at the radio he has but he gave me a little bit of an idea of what he had. First off, and i am hoping this will work, can you hook a cd changer up to a stock radio? He...

bellieve me, u will not be disappointed by the kv2's. awesome sq and can get very loud ported.

what do u mean a layer of fiberglass then a layer of resin? they're the same thing arent they?

Well i'm designing a box for someone and they want it ported, but the problem is is that there is only enough room for a sealed box. He wants the box tuned low (26 hz) and he wants a decent amount of port area as well. We have tried the sub (a dpl12 which is basically a shiva) in a 1.5 cu.ft...

This is my 13kv2 in a 0.9 cu.ft. sealed with 350 watts. This ***** can move. The camera captured the sub "out" and I couldn't get the blur effect so here ya go. That box turned out to be too small so I put it in a 1.5 cu.ft sealed box and that smoothed things out quitenicely. The sq from this...

some of you are missing what mrray said to start with. he said "in this application" the SS had better low end. the xxx will not dominate everything in every application. no sub can do that. was the xxx starved for power? of course, but i think what mrray was trying to show with this comparison...

how many layers did u use for the back (mold of the floor) and how many layers did you use for the front?

i just made the first layer for the base of my kickpanels and before i add another layer should i sand the first layer? would it sound right with the tweeter mounted lower on the baffle of the kickpanel rather than higher? thanks for any help.

any pics?

eD kv2

one 3'' port seems a little small especially for a brahma 15. only about 6-7 sq.in. of port area

well i was planning on getting re re components. do u know if they are off-axis? also do the re componenets work well in sealed enclosures as compared to ib. i think they were really meant for ib installs, but i think i'll have to give re a call on those questions.

thanks for the quick reply. ****, i wasnt expecting a reply that fast. u dont think it would sound good just point the speakers straight towrds the headrest. iirc that was how guantlet did his in his thread. how many layers do u think would be sufficient?

i'm planning on making some kick panels for my truck in the near future and have some questions. Is one layer enough just for kick panels? After I put the tape down where i'm gonna make the mold, I use something like Pam so it will not stick to the tape, right? The reason I'm asking is beacuse...