Recent content by Pinki

im screwed now i had all the widths cut at home depot yesturday i hope it all works out

ok so im sitting with my box its 40 inches long using 3/4 mdf so that gives each speaker 12.33 inches its 15.58 inches tall including 1 inch x 12.33 slot and again 3/4 mdf so 12.33 in effective for the sub and its 19.5 inches deep thats 18 effective after math i found that port should be 15...

now all i need is the port length ima try the math again and winisd ill get back if i have issues i did it manually last time but that was 2.5 years ago.

Audiobahn site isnt working for me here at work. i blaim reader 4.0 that my work refuses to upgrade. besides the fact that i dunno wanna go stock size

the box will be approx 39 " long x 20" wide x 12" deep. theres a square hole in the trunk at about those dimentions that id like to fit the subs into. i guess i could go higher on the frequency but i relize last time that i built a box that i bottomed out a bit too much.

i just got my 3 alums so i can get 1ohm load and i was thinking ported box but i know audiobahn subs box listings are conservative at best on teh website my last system i made my box 2x larger (2x 1200q's) than recomended and it was great should i do the same with the new alums. I drive 94...