Recent content by pete Stockbauer

  1. pete Stockbauer

    Protection light

    After checking it out when I had time turns out my ground was the issue I grounded it in a different spot after I cleaned up the area and it was fine ground wire little bit longer but it works
  2. pete Stockbauer

    Coaxial speakers

    Well after about 3 hours of messing with it I got it seems I have to turn on the lpf also to take some of the highs out there were way too high that's what was causing the issue seems good now maybe a little fine time but I know now
  3. pete Stockbauer

    Coaxial speakers

    Yes it's not the doors
  4. pete Stockbauer

    Coaxial speakers

    Yeah I done some searching was reading different post from what some people say that tinny sound is in the 1000-4000khz range I'll have to play with this DSP and see what is what
  5. pete Stockbauer

    Coaxial speakers

    I'll have to check that out my head unit has a pre set EQ pioneer MVH-S622S not sure if it has a adjustable EQ like some of those newer ones now the DSP I can have to figure that out
  6. pete Stockbauer

    Coaxial speakers

    Still playing with it sounds pretty good around the 70's hpf I'll play little more see where it's best
  7. pete Stockbauer

    Coaxial speakers

    I have a set of the pro audio 6.5 also just to have but I'll set it about 60hz and go up from there and see how it sounds
  8. pete Stockbauer

    Coaxial speakers

    Even though I have it set at 100 man these coaxial's sound tinny there skar audio tx6.5
  9. pete Stockbauer

    Radio harness

    That's what I did a lot easier
  10. pete Stockbauer

    Coaxial speakers

    Ok thanks
  11. pete Stockbauer

    Coaxial speakers

    I have that set at 100
  12. pete Stockbauer

    Coaxial speakers

    There full range I wasn't sure if it should be or not
  13. pete Stockbauer

    Coaxial speakers

    Question on coaxial speakers that range 50hz to 20000 now should you set the lpf on them also I'm using a preva DSP on my system
Top