Recent content by OldTrunkMonkey

My first question is how are you getting audio to the crossover, are you using a speaker level to line level converter? If so, it sounds like the radio output is clipping. No such thing as weak speakers. Usually mismatched loads, not enough power, or something in the system clipping by...

When I install a system I ground ALL components to the battery neg, NEVER to the body. ALso good practice to replace the battery to ground 6 or 8AWG wire with 4 AWG. Even the amps ground is 4 AWG or larger as required to the battery neg. I use a ground distribution block to insure all grounds...

When I install a system I ground ALL components to the battery neg, NEVER to the body. ALso good practice to replace the battery to ground 6 or 8AWG wire with 4 AWG. Even the amps ground is 4 AWG or larger as required to the battery neg. I use a ground distribution block to insure all grounds...

I bought several Debezt audio amps years ago, they were made in USA, company was in Fort Myers FL. I'm in Clearwater, FL. I bought two DB-U200 amps, rated at 120W/ch 4ohms, 200W/ch 2 ohms, 300W/ch 1 ohm, 720Watts mono 2ohms. The amp is fused at 60amps, requires 8AWG minimum power and ground...