Recent content by momuzykent

My trunk was originally factory grey so I brought some SEM dye to change to black to match the interior of my car. Also added black suede to beauty panels as well. Next, waiting on plexi to be finished, screw beauty panel in & make some minor adjustments so all pockets will fit...

OK a few more updated pieces (I'm moving very slowly but :giggle::giggle:). After putting the beauty panel in trunk I felt there was to much dead space from top to bottom so I cut out antoher opening that will house some type of plexi and engraving. They were upholstered in black suede in...

ttt

ttt

Then started working on beauty panel. This was my first panel flush with sides of the trunk and I have to say it took me forever to get it just right. 3 wasted sheets of 1/2 mdf I finally got it right. I had to use a router so that it would sit flush against the box since I used hex bolts on...

Ok here is a little more progress and by the way thanks for all the comments on my build so far. Well not any room to display x-overs and I wanted to get them out of the way I'm going to mount them on a board that will sit under the sub box: Next was going to keep it simple on this build...

As title states want to purchase audio control epicenter. Please PM me price shipped. Thanks,

I need to go back and finishing the material on end of the armrest. Then started cutting out the floor for the trunk: More pics to come soon! Next I have to mount amps, passive x-overs for componnents and 6x9's, make beauty board so box will be flush and finishing wiring system...

Ok a few more pics. Wired subs in parrallel so speakers look like they arent wired, added final coat of paint & added plexi to box wtih hex bolts: I will remove film from plexi once I'm done with the turnk. Then I finished ski port:

Next I drilled holes for lights to go thru & wire subs in parrallel I just got logo for the plexi so today or tomorrow hopefully I will get it on and plexi added to box to complete it for now before installing. Design wise its taking me awhile because I don't want the wire to be...

OK finaly getting a chance to get back on this, been very busy late. Looked what arrived in the mail finally This was my 1st time drilling plexi this thick. All you need is a glass bit, some water and a some patience. I used a baby bottle since it was laying around but a spray bottle will...

I'm getting there slowly, havent had much time to work on it lately! Thanks Updated pics of box after 3 coats of primer, 1 coat of white paint and then a couple coats of red. Still have to mount leds in box and drill holes for speaker wire. Waiting on plexiglass to arrive &amp...

YOU ARE EXACTLY RIGHT, to each his own! Opinions are like.....well you know the rest. Thats why its my car and done the way I want it done. You can do your car the way you want!

Added 1st coat of primer, removed screws which would be visible from back & then filled in the holes. Caulked the edges of box to make sure its sealed. After sitting over night drying, sanded to get ready for more primer. Added 2nd coat of primer. mdf soaks up alot of paint so...

subscribed...nice job! cant wait to see it finished