Recent content by Litoffsnozzberry

yeah sorry I'm not used to these inline fuses. I tightened everything but it was a hair loose on the plastic cap which shouldn't affect the connection but I guess it does 😓 shitty *** chinesee fuse. I'm sorry 😅

it was weird cause it had power gunna see if there's any difference in amperage after fuse. it's weird cause it's 100 amp fuse but my amp is reading 2 amps lol and max output is 62.5 amps. why the 100 amp fuse? lol shitty company is what I'm leaning on. it's working but I'm defineatly need...

so it seems my fuse has rattled loose. my inline fuse is absolute garbage and I need a new one. that is the problem I'm assuming. literally jumped my amp at work and was flashing came home unplugged the remote wire ran a jumper, reconnected battery realized my fuse cap was loose, not the actual...

so I ran all the tests. no voltage drop after the fuse, took it apart and retightened everything down. no breaks in the wire. i used a 12v power probe and ran the remote wire to the positive, still had voltage drop. do amps automatically recognize speaker impedance? alternator max output is...

I can take another pi ture on lunch of the neg term from battery to ground

my ground has a .2 resistance its on a bare metal but not the chassis. it reads 12.8 my battery ground is a 8awg wire, could it not being a 4awg ground make a difference? fuse has power and continuity between it. the only options I see left is moving my ground and adding an extra up front from...

I exchanged the old amp with a brand new amp. and the problem still persits. I removed my dash again to check connection.i also removed a parking brake wire that I grounded to the metal frame around the radio. where the screws that hold it in go. still lit a red light.

so I disconnected my ground for the parking brake figuring that might of been an issue it worked properly before that ground and that wasn't it. checked the connection on the head unit and it was still capped perfectly for the remote. do I have to splice in the blue white remote wire and the...

I I got a brand new amp and it is still doing the exact same thing.

the fuse was a little jenky. it's an inline and the insulation was exposed a little so I put electrical tape to insulate it because it had a weird inline twist connector not two studs like I'm used to.

no I haven't disconnected all wires yet. I'll try that now and see. Thank you!

yes I did that after, sorry. to test my remote wire. re.ote wire is a 16awg wire running from my rote harness on my headunit. blue and white spliced in and ran along my sill plates. reads 14v before plugin 6v after. I DID THIS JUST TO TEST MY AMP BECAUSE THATS A CONSTANT 12V POWER.

Hello new to the site hope i am posting in the right section! so I recently installed a kicker cx800 amp woth two 10 inch kicker comp r subs and it was woring fine for a week but now it is tripping the red port? light. amp won't play any audio. as soon as I turn the key its already in...