Recent content by john-1956

again thank-you for your help I will check the wiring again.

I have a main wire runnig from the batt. to the amp it has a 20 amp fuse in line. there is a wire running from the stereo to the amp and I have a ground wire to the car chassis within a couple feet of the amp wire gauges are what I was quoted from the instuctions from the amp.

I have replaced the batt with a cold start 600, and I have had to replace the alt. for the last 2 years. I ran a test on the charging system and found that when I pulled all the fuses and checked each circuit as i re installed the fuses that when I installed the fuse to the batt. and then put...

thanks for your help. I will pass on the capasiter. as for the tweeters. is it fine to put them inline with the speakers. I just could not figure out how the amp would seperate the two. does the pass. crossover help here? again thanks.

Sorry, I'm kind of old school when it comes to stereos, this is my first amp hooked into a stereo. my system is a Kenwood KDC-4019 cd-reciever, a L.A.sound PCH 50 amp, pioneer 6x9 speakers. I used a wiring kit suited for this amp. I am just thinking that the alt. is just not up to it.

I have and older car and it uses a altenater rated at 65 amps. I have installed a fairly normal cd player, reciever (kenwood) and I have a 200 watt. amp as well installed. my speakers are pioneer 6x9, triaxle. The stereo plays fine but I have a problem with the batt. discharging and causing the...