Recent content by Jmac4119

Thanks, but I'll have to pass on what has been listed so far. A couple other things I should specify are I defenitly want a two way setup and I'll have 150 x 4 rms to supply. Also, mounting depth should be under 3". Thanks

Looking for 6.5 component set preferably under $400..possibly $500. I will be running active so no need for crossover but will take them if need be. Really looking for morel hybrid 602 or hertz hsk XL but open to suggestions. Ready to buy now!

Its an 07 F150 and im using a harness. Im just not getting voltage to the harness on the red ignition wire. The 20 amp fuse is not blown at the fuse panel and im getting voltage to the fuse panel as well. Im guessing my only options here are to run a new wire from the ignition to the harness or...

The fuse is not blown

Well, I have been trying to install a Kenwood DNX5140 and have run into a problerm! I wired everything up and im not getting power to the unit. So I checked my yellow and red power wires going into the harness and I am not getting voltage to the red ignition wire. That would explain why im not...