Recent content by -jb-

This is why you should: a) Make sure the plastic sheet is really big and will catch dripping resin. I put the cup under the door to catch the run off as well b) Do a 2-3 layers of thin matt instead of one layer of thick fleece to make sure you completely soak the matt for a solid base. As...

Start by sanding the door panel down with 40 grit, then reattach to the door with a large plastic sheet between the door and the panel. Then put two or three layers of fiberglass mat / resin on it (1/2 oz should be fine for a base). Make sure you don't mix it TOO hot so it doesn't warp the...

A router (table). One of the best tools in a woodshop. If you have a round template to use, then using a router is the easiest way to go, period. ~JB

I'm not sure what the proper size is, but you should really take your time and plan out your box instead of just rushing to make one real fast. ~JB

Bubble gum? Have you actually used this stuff? Does it smell like bubble gum AFTER it cures or when it's mixed? ~JB