Recent content by Jakkle5

  1. J

    finding 1997 civic firewall???

    When you get that done post back and we'll show you where the head unit goes. Bet your coming up with one hell of a system.
  2. J

    finding 1997 civic firewall???

    hahahahahhaaha this thread is priceless.
  3. J

    What the hell is wrong with my car?

    you dont need your car, just bring the alternator.
  4. J

    What the hell is wrong with my car?

    what kind of car? If it has a chip in the key and you drained the batteries it could need to be re-programmed. The computer see's it as though someone with a new key is trying to start the car because it loses the key ID when the batteries drain completetly. Happened with 2 of my fords.
  5. J

    Design's welcome......

    The sub is marine grade. Completely sealed. The last box i made for the boat was MDF covered in resin but i wasnt too confident in it holding out moisture. The composite board is essentially PVC board. I guess i could go sealed but was looking for more sound output.
  6. J

    Design's welcome......

    bump any ideas?
  7. J

    Design's welcome......

    This is for my boat. Its going to be made out of 3/4" plastic composite board. The dimensions the box has to fit into are 16" Tall 26" Long 13 3/4 wide I can prob go 2-3 inches more on the length. The sub i have is a 10" with a 5 1/2" mounting depth. I would prefer ported as this will be in...
  8. J

    installation

    most likely just a cable that attaches directly to both since they're both Kenwood. Call Kenwood directly and tell them what you have and they'll tell you what cable you need.
  9. J

    installation

    answering you in the style that you posted the question... "With your hands and small tools in your car"
  10. J

    Burning smell (wood)

    I get that for the first hour or so of hard playing with a new box. My theory is its the sawdust left over inside the box.
  11. J

    Waterproofing MDF sub box....

    Got it. One more question, this resin is taking like 10-14hrs to cure and even then its still lightly tacky. What am i doing wrong? I used more than enough cure mixed in.
  12. J

    Waterproofing MDF sub box....

    I put one coat of resin on it last night. Going to put one more on it today. Is there a need to put it on the inside of the box also?
  13. J

    Waterproofing MDF sub box....

    could you quote me a good price on a gallon of this plus a spray gun? Thanks!
  14. J

    Waterproofing MDF sub box....

    Should i put the hardener in with the resin also or just straight resin? This is kind of what i was hoping to hear. Resin and then carpet.
Top