Recent content by Hybrids-M3

Wire are a necessary evil in building a system and it is usually a challenge to hide them. However, with the way this install is designed, all the wiring, terminations, components, etc. are located between the back seats and the back wall of the trunk. With the back seat down, you can access the...

Oh, I am sorry. I will take some pics of the L6's. I have to take the passenger door panel off to throw another 3-4 sheets of deadener and I will take some pics then. Nothing special, really, just a woofer mounted in a 1.5" baffle. I tell you, though--those L6's will reveal every resonance in...

Thanks for the compliments, sir! The woofers are not in yet. I am doing an IB configuration with the baffle hung under the rear deck. This is what I did not do more to make the back panel of the trunk more intricate--it is going to be mostly obscured by two massive baskets and motor structures...

Thanks! The IB sub baffle is still to come, so the look of the trunk will change a bit, but I am really pleased with how it has turned out.

Got the trunk panels covered, so I'll start out with some finished pics. This is the covering material. I really don't understand why people go with vinyl. A high quality vinal costs nearly as much as leather, so why not just go with the real thing? I covered the center panel last and...

I wanted to retain my spare time and I actually wanted to be able to get to it. I went from fully assembled to this in about 5 minutes using nothing but a drill and #2 Phillip bit. If I used a screwdriver, it would have taken me 10. And this is why it needed to come out. I used this stuff...

I'm not Scott, but he would say thank you!

Here you go, man. The enclosure was designed by Pete at http://pwkdesigns.com/

The headliner material? I bought that from a seller on ebay. Suede Headliner Foam Backed Upholstery Fabric Jet Black 61" Wide Suede | eBay

Thanks, everyone. I really think the covering on these panels is going to set the trunk off. I have several slow days starting tomorrow, so I fully expect to get the amprack and panels finished. However, the trunk won't be completely finished until I build my IB baffle below the rear deck. The...

Thanks, man. This is really a no-frills SQ install, but that does not mean it can't be pretty!

About to finish up the trunk panels. Things are really starting to come together.

And here is how I get perfectly fitting panels every time. There will be a raised section on the middle and right panels, as well. Also, the cutout in the center is not the size of the window, rather the opening for my plexi. There will be a raised piece molded into the center panel...

Time for some trunk panel action. I am creating the rough shape of my panels. I try to get them close, but I don't go overboard making sure they fit absolutely perfect--you'll see why in a minute. The two panels on either side of the amp rack serve as the platforms on which the finished...

Oh hell, I did not notice you were running the Blues! I remember those things from back in the day--always wondered how they sounded. Looking like a solid build! Can't wait to see/hear it!