Recent content by griffee

I think the one I had was a P35 Homossaywhat. I used two of them which went to the 4 channel amp I had, and then I ran RCA's from the outs on that amp to my sub amp. Check out there website. they have a ton of different models depending on application and pick the one that suits your needs...

Nissan Titan King Cab. Vero Beach, and no problem for a listen. LOC isn't hurting SQ at all. I did find the Navone to be more of a pain to deal with and adjust then a previous LOC I used on my old truck(real finicky on the voltage setting output). Honestly thought the Navone is a crap build...

Okay the wrap up. I have everything back in, and did the install in my required 4 days(except for the re-installation of the rear seats while tuning).I didn't take pics of the front door panels reinstalled because...well they look like stock door panels and a stock door.The tweets went in the...

Pics 1 is where I put the crossovers(one on each side..same spot).Not easy access as the seat will have to be pulled if I ever desire adjustments,but I like the fact that they are pretty hidden.Besides I drove around for 2-3 weeks with no seats making all my adjustments..which are now all...

Pics of the firewall behind the rear seats.Amps being mounted.This is a very precise fit.To go here they have to placed here..not an inch to the left or an inch to the right.They have to fit in between the hinges.I mounted the amps with stainless machine bolts and lock nuts.I didn't like going...

These next pics are of the doors all damplified up,the plates mounted with mids,and overkill added.I had about as much time in these doors as well as the rear doors.I didn't take to many pics of the painful damplifying process.Once I started bleeding I wasn't stopping to take pictures.I cannot...

Lets head to the front doors now. These first three are of the mounting plates and rings for the mids in the front doors.Both the plate and the ring are 3/4 MDF and very necessary as the mounting depth on these 6.9's is very deep.My windows clear by a whisker and not much more but they do clear.

First 2 pics are of the 8's mounted in the doors.Also shows the now added overkill pro. Next two pics are showing the alignment of the 8 inchers with the speaker grills.They are a little off due to size, but they are subs so I don't believe there be to much importance here. Last pic is of door...

Pics of the Damplifier rear doors.I really went all out on the inside of the doors to make them as sealed as possible.Alot of the work can't be seen here but if I had to guess I would say about 6 hours went into each rear king cab door.Those picture can be seen here:

Okay the first pic here is of double stick tape being applied to the 8" mounting ring.Three reasons for this: 1) it holds the mounting ring while drilling the mounting holes 2)it squishes out and gives you an idea of even torque 3) it lets you know for sure you have a seal underneath the...

Okay these pictures are of putting those very sexy sexy 8 inchers into the king cab rear doors.First pic is the 8" mounting rings out of 3/4 MDF that I jig sawed out.The second pic of how much is going to need to be trimmed.The third Pic is the showing the trimmage again.The fourth pic is the...

I've been meaning to put this write up here for those interested in the power lines and you will have to excuse my lazyness, but alas here it is in detail. So I am a stickler for stock. Stock appearing is how I want my entire system. I don’t want to really be able to see anything. No amps, no...

Get some of the Powerlines.Do it once and do it right.Besides you should have plenty of money....unless of course you haven't kicked that racing habit of yours.

Thanks for the good words. Do you know if there are any competitons for systems with no box, and factory head units? I don't know if it would win but no doubt is very respectable.VG sound quality as well. Any clues on if that's a good SPL number for what I have and the way it's installed? I...

LOL....Well it's not the pics I have a problem with posting.It's either doing the write up all over again or a ton of copy and pasting...and I'm being lazy. http://new.photos.yahoo.com/tpslizard/album/576460762344250866 There's a link to all the photos of the install...they just don't have the...