Recent content by gran0310

oh i love it..its 500 RMS and i have about 375 goin to it and it sounds like more than 1 10" thats for sure. but the nice thing is, is that most all of the tuck is sound proofed one way or another(dynamat Xtreme) so no one knows i got anything!

the flames were free hand cut with a Roto zip style attachement on a dremel, i recommend to anyone else to either use thicker than 1/8 inch plexi or a different cutting source for this type of thing, it turned out cool but it looks like the flames are more etched in ice than a clean cut style look.

my buddy has 2 MOMO 12's and from what hes told me and what ive heard the MOMO sub is pretty musical, not really for pounding. plus last year when they came out with their new "look" their leads coming off of the wire jumper always snapped. i have seen tons of these things sent back to MOMO last...

yea but IMRAL3 the RMS power on the 6000 is 250 and the RMS power on the 8000 is 500 (400) for the chrome ones. so for the 6000 i had 80% of the RMS power and for the 8000 i had 75%. thats how i compared them.

i have a mazda and its exactly like the ranger interior..i slide open my rear window and it makes a huge diference and i only have 1 10.

i have had a 6000 10" and an 8000 10", with proportionate power going to each the 8000 hits harder and deeper. i had 200w goin to the 6000 and 375 goin to the 8000. plus i work at CC and who ever told you that is a dummy.

I have a set of the MOMO 6.5 inch components and they are super nice and REALLY clear at high volumes. the 6.5's are like subs they put out so much mid bass, and the tweeters are clear. the only draw back is that you pretty much have to listen to them at low volumes for 40 hours to break them in...

i have a 98 reg cab mazda (EXACT same thing as a ranger) and i have one 10" MTX 8000. its enough for me, but if you want to be pretty loud it would be better to have 2 10's. if you own the truck and don't mind experimenting rip all of the plastic behind the seat out and lay some plastic down...

try http://www.audioenhancers.com, im not sure if they will be the cheapest, but i think they have low prices

get the alpine...they are a VERY clean amp, very good for highs, and make sure your connections are good, no cheap cables

check out http://www.audioenhancers.com for a custom box

Any mid-bass coming out of the 6X9's will be way overpowered by the subs, and any highs will be muffled by the seats.

Here is my current system set up: I have an Alpine CDA-7875 head unit, i am running 2 mtx amps, one thunder4244, and one thunder6152.There is a 1farad monster cap under the hood. For the fronts i have a Polk/MOMO 6.5 in component set, for the rears i have Pioneer TSA-6865 6X8's, and Polk...