Recent content by Gksportster

Hello I have a 38 Oldsmobile business coupe. what my problem is everything is fine When I use anything that I put a relay on like headlights and cruise control. When i set my cruise it activates the relay the deck will stop playing music tell I shut it off and restart the deck. is their a...

Running the numbers as the box sits now I have 2539.758 cubic inches or 1.469768 cubic feet That’s not enough to make the box a ported box right? I cannot go no bigger that’s as big as the box can be. if it is then what size of port and length of tube thank you kelly Sorry for all the questions

Thank you Everyone glue was squeezing out of the joints I wiped a lot off it was running down the sides all over

Those splits will be gone if my math is right I was going off numbers I had and when I was making the box it wasn’t working. rigjt now it’s 20 1/2” wide and with me running numbers it looks like 12 1/2” wide will give me the air space I need. If not I will do as you say and glue and clamp...

I used screws to mock up first I’m having to clear my air tank that is their and no where else to hide it. So both things are sharing same space

Thank you I will do that

I finally made the sub box today with different dimensions. is my math right ? what I did was measure as if it was two boxes then added them together The lower box was 9”5/8 and top measurement was 5” so I did 95/8”+5” = 145/8” divided by 2 =7 5/16” So it is 7 5/16”x9”x12 1/2” = 822.6563 cubic...

I’m going to build shelf’s at a angle on ether side for holding the 2 amps and I have to mount the two air compressors and valve body back their also I’m thanking behind the side panels My wife baught me a yeti cooler and it’s not the small one so I have to have that in the trunk also when we...

It’s all behind this panel behind the back seat I put in for the grandkids to ride Here is the pic of the old box with old kicker comp speaker and a pic of the car and a pic of the car before I done all the work to fix it up it’s taken me 25 years and I’m working on the interior now

No problem thank you. It would of been easier if I didn’t have to block out for the air tank. I didn’t want to have it in the trunk space it would of had been placed at the very front as you looked in and I didn’t like that at all so that was my olny other place to make it fit

Yes I have to not enough room for a ported or slotted box. that’s why I put in the header was . Making a sealed box have ? Thank you for your help

I have to build such a odd box because only place I can hide my air tank for my air ride is where I have to mount the sub box so it has to mount under it. that's why I have to have the 9 1/2”x 9 1/2” out of the box full length of the box. if I did my numbers right a 20 1/2 width inside...

Thank you my problem is doing the math correctly