Recent content by ehagoo1988

I have 2 mtx 12'' terminators on a dual xpe 400 watt amp. This amp hasnt been giving me problems until a few days ago. It started to cut out. I looked at it and all the wire was connected. Even checked the remote wire which was kind of a pain. I checked all the fuses. I took the fuse out of...

ill put the gain up like a quarter of the way. does the frequency have anything to do with it? and no i bought the amp at walmart haha im guessing that was a mistake. they are wired in series and dual voice coil 2 ohm.

so the blue wire to my head unit is my remote wire? well now im pissed. i asked him about hooking my remote wire to either the blue or red wire...maybe he was talking about the red wire. hmm alright. but still my amp still goes to protect mode whenever the hard bass hits. is it because its...

the subs are 2 ohm but idk what ohms the amp is. and my radio fuse is shared by my cigarette lighter. I drive a 1999 honda accord lx. There is a blue wire but the guy at roger stereo said that was a bad idea. i cant recall why

ALRIGHT. well i did that and the subs cut on. so i put on a song with bass and they lasted like 2 seconds before the amp went into protection mode. So should i expect this from a bad amp like this? or is there something else. AND my amp wont turn of now even when the car is off. Is this...

remote wire is hooked up to the radio fuse because the radio wire harness i bought didnt have a blue and white striped wire.

So i bought 2 mtx terminator 12"s with a dual xpe2700 400 watt amp on a dual xd1225 head unit. The amp turns on but nothing will play through the subs. I rechecked the wiring and there was no problem. none of the fuses are blown. Rca cables are right ground wire is tight and on bare metal...