Recent content by eggwardo

Ok that wasn't the issue. I got a new harness and hooked it up and nothing changed. This was a few weeks ago so my memory of the whole thing is kinda fuzzy. I went on vacation so i left it alone for a while. I'm going to be referring to just the front 2 speakers here. And the wires i'm...

99% sure it's the harness. I cut one wire and the other speaker started working perfectly. Redid both wires for the speaker i cut and the problem was still there. If i put the harness in crooked i can get either the right or left speaker to work correctly but not both at the same time...

i disconnected both of the grounds for the little wire harness things. And nothing changed still one bad and one good. So that cancels out the bad ground theory, but doesn't cancel out the bad harness theory. I also rechecked my wires to make sure i didn't mix anything up in the routing of...

I have a 2011 Jeep Wrangler with the stock (RES) Radio. It has super low wattage so i wanted to boost the power with an inline amp. I got a soundstorm F4.400 (sorry i can't post a link). I hooked it up with the high level inputs. Basically running the speaker wire to the amp then back out...