Recent content by Dsaulen0902

Just chiming in here because your talking about what i have a question about. If my box is tuned to 30Hz and i should set my SSF 1/2 an octive lower than that I should set it at 15Hz correct?

I am going to build a new box with my dimensions I figured I will have 1.76 cft net with a 3" diam X 6.5 inch long tube it will be tuned to 35 hrz. Thx for all the help

can i cover the two holes and make one 6"X26" tube "port" is that correct "port"

they are not terminal cups they are next to the terminal cups on the back. The box was originally for two tens someone has cut the front and made it for one twelve. If i have to i will build another box was just trying to use this one my son has.will try to get some pictures on here

my amp is an MB Quart MB Quart ZA2-1000.4. 125 watts x 4 @ 4ohms unbridged and 500 watts x 2 @ 4ohms bridged attached is a picture of how im going to wire it to a Pioneer TS-W311D4 12 inch 1400 watt (400 RMS 200 per coil) and two Kenwood KFC-6995PS 6x9 650 watt (125 watts RMS) My wife mostly...

anymore help or information would be great   ---------- Post added at 10:11 PM ---------- Previous post was at 10:11 PM ----------   anymore more help or information would be great

I have a box already built it is 2.4 cubic feet and has a cutout for a 12 inch sub it has two 2.5 inch circles for ports how long should i make my tubes

I recently purchased an MB Quart MB ZA2-1000.4.... It has two x-overs one for channels 1&2 and one for channels 3&4. It is also bridgeable. My question is can i use the lowpass x-over for channels 1&2 and bridge them, to run a 12" sub. Then use the highpass x-over for channels...