Recent content by Dozyproductions

Thank you. What I linked is adjustable so I should would still need a signal line driver anyways? There are more expensive and 'premium' LOC's so I'm guessing that they'll be able to provide a higher voltage signal.

Thank you. I replaced all speakers and originally just bought some RCA splitters. Would adjust the gain of the rear speakers at the amp to control the 'fade'. Can I ask then, can I just use the harness's rear speaker wires to get a full signal, connect to a 2 channel LOC, then split the RCA's at...

Yes this diagram is at the amp side. Problem with DSPs is that in my country they are very cost prohibitive (600zl - 1500 zl) and the to be girlfriend will not allow it. If I were to use an LOC, which wires would I hook up? I have 8 - 12 speaker wires at the harness. Would it be with the IN...

I recently bough an 08 Mitsubishi Lancer with the rockford fosgate OEM system where the aliexpress radio uses a CAN bus to connect to. After 30 minutes of listening I knew it needed to go. Took out the OEM system, bought 2-way components upfront ,coaxils for the rear, a 4 channel amp and...

Very true. The BLK tweeter is crossed at 4,000hz. My home audio stuff is crossed at 2,100hz!

Will say this. If you're going to make any trip here, it'll have to be for more than a weekend or two so that definitely will be a hard one to figure out :( Both of those sets I mentioned have inconsistent set and individual driver rms ratings. Wonder if this is something more normal than we...

Heh. Sounds about right with what you're friend does and a genius idea. If anything, you should visit that tri city area. Gdansk, Gdynia and Sopot are great places! To give further perspective; a laptop from the U.S. costed me 4,500zl ($1,300) when a comparable one here costs 6,700zl. My...

Cheap and decent 80 watts @ 4 ohms x 4 costs 400-500 zloty where I live. Used is of course less but also with less power. Speaking in terms of amps, the last time I was in the car audio scene US amps wasn't bought out (if memory serves me well) and PPI art series were still plentiful online and...

thanks for the response. Was wondering if the electric magic was going to work ;) Knowing nothing about how many amps are originally running through the system, what about a more conservative scenario where we're cranking 12 volts to 24 v? How can we figure out the figures coming to the input?

Let me know if this hasn't be covered a million times. My search powers are weak. Guessing there have been a few people who tried using a Chinese 'home' t-amps for car audio. I have a 3116d2 working my home speakers at the moment and definitely gives 'livelier' sound than some of my older NADs...

Thank you for the advice. I live in a country where listening to what you want to buy before you buy it is rare and everything is damn expensive. Since I already know what Focals, Hertz and similar sound like and between the limits in choices and high prices it really goes down to deciding...

Have been in contact with "Klaus" and he's very vague with his answers. He's only provided me with basic specs (included bellow for just one speaker set).You have a good point and will ask them that question. At the same time, angling them can only go so far so there will have to be some off...

Think balance between not having the dedication or not having the tools to do it ;)

Thank you. I realize that the tweeter will be the most important with imaging but if the woofer is xovered at 4khz, won't it still be enough of a factor? Either way, this install wont be more than making baffles and deadening the doors.

I tried searching for the answer but coming up a little short so I hope I'm not asking something that's been repeated/talked about a million times. If so, if you have a link I'd appreciate it. So, hello. I got a stock Lancer and the factory RF system is abysmal and needs to be replaced. I'm...