Recent content by DirtyBird1

The deck is zero'd in so all speakers are playing at the same amount, I have the sw level on the deck all the way up and messed with the amp settings, nothing came on. I'm thinking it's either the RCA's or the sub wiring

I'll check the RCA's first when I get a chance. I just don't want to end up unscrewing the subs out of the box cause getting the rubber cover on the the Alpine to line up with the predrilled holes and everything was a pain The head unit is a 4 volt preamp output. I had the rca's in my old Jeep...

I put some music on to a usb drive. My SW level on the head unit is all the way up and all my audio settings are "flat" I turned the sound up 2/3rd of the way (no distortion) I turn the gain up on the amp up and up but still nothing from the subs. I turned the gain up a little and messed with...

Thanks guys!! I will burn a CD quick and get to it in the morning!   ---------- Post added at 09:52 PM ---------- Previous post was at 09:52 PM ----------   Soundstreamer, I owe you a beer

Yes, I am playing via bluetooth through my Kenwood. Why would it only play up front on bluetooth?

I have new 5th Gen Type R's in a ported box and a Sundown 1200d mono block amp. I have the subs wired to 1 ohm, and just installed everything (brand new) Amp turns on but when I turn the gain up, the subs don't play or anything. I've switched the RCA's around, still nothing. I have most of the...