Recent content by Dblboinger

Okay, so I'm rolling on the alarm installation (thanks Mendon99) but now I've got some other questions. For some reason Mazda only put electric lock on the passenger door triggered by a microswitch in the drivers side lock. If you lock/unlock the driver door, either with the key or the inside...

That would be great. I'm putting together an "as built" drawing for all of my added electronics. My email is dblboinger@yahoo.com

Is this a restricted access site? I tried to register numerous times and it keeps telling me "email address invalid". BTW, I'm going with the info you provided. Thanks for the help.

Are you sure this is correct? I received documentation from 3 other sources now that says the DISARM is Dark Green/Black. The electrical diagram shows the LG/Black goes to the Door Key Cylinder Switch on both doors. The DG/black goes to the passenger Door Lock Switch.

Well, I found the problem. There are 2 CPU's at the drivers kick panel. CPU#1 controls the rear window defrost, rear wiper, etc. CPU#2 is behind CPU#1 and controls the signal lamps, warning lamps and...the theft deterrent system. When I found the connector on CPU#1 and the pin count corresponded...

I have a 1993 RX7. I'm installing a CrimeStopper SP-500. I have questions about the OEM Disarm and OEM rearm leads on the SP-500. I can't find where to connect them. Every source of info I have found says to connect the dsiarm to a dark green/black wire on CPU#2. The factory electrial manual for...