Recent content by dafobbishon3

I am a long time caraudio forum member. I used to be an audiophile back in high school. You can see what I used to have in my old car in my signature below. I had a custom made 15" that was 2000rms strong and I had a sick front stage: HSK165 powered by an Arc Audio KS300.2 and I had a huge...

My amp is setup on the back of my backseat but as for the wires, my power wire is hooked up to the power terminal on my rear battery and my ground wire from my amp is hooked up to the negative terminal of my rear battery and my rear battery is grounded. It's grounded correctly, because I used...

Stinger SHD20 HPM Series Power or Ground Distribution Block That's an example of one. Instead of a battery, you can just use the distroblock. So the power wire from the front battery, run it straight to this distroblock in the back, then from there, attach your amplifier power wire to it. Then...

Yeah, I have that same battery now; the hc600. It shouldn't cause a problem, it's a tiny one. Well then I guess. Have you tried to turn the car on, but with the rear battery hooked up and NOT the amplifier hooked up? Because if the amplifier isn't hooked up to the battery, and only the rear...

37 or 38. Because the highest is 50 so that's 75% of max. At low volumes there is barely any bump, once it gets to 35-38 volume, then you start to hear a somewhat decent amount of bump, but it's no where near it should be. That decent amount of bump, keep in mind is with my subwoofer level on...

Okay UPDATE. I tried daisy chaining anyway down to 2 ohms and there is output! There is some sound of bass. But it's not loud at all! Gain is already at 4V to match the preout voltage of my head unit. And my subwoofer settings is already on max on my head unit (this isn't bass boost btw. It's...

This happened to me before as well, car not starting. BUT it was because the battery was dead, along with my front battery. Because when you chain them together, it draws so much more energy and it has a big impact on your alternator. Unplug the rear battery and see if the car starts, if that's...

Yes. I turned it off and back on. And nothing. I haven't changed a single thing on my HU. Even with my last setup, when I sold it, I didn't turn off anything on the HU, it was still how I last left it. I initially thought that could've been the case. With the output off, no sound. But I double...

From what I'm reading, your kinetik is your rear battery because you have the stock one for your car up front. Assuming that's the case, you have to have two ground wires; one for the battery and one for the amplifier. That's exactly what my setup has. I have a rear battery and that battery has...

Oh okay I get it, I see why they put those two extra terminals in my amp. Well I instead of daisy chaining, I just put the wires in each of their own terminal respectively just because it's neater and less of a hassle. And I try to set my gains and to see if my subwoofers work, and they don't! I...

Well I finally received my amp! Apparently the Hifonics BRX1100.1D mono block amplifier has two channels, not one ( like a mono block would have ) -_- Now with that said, since there are two channels, I "assuming" should be okay with just wiring the subs as 4 ohms as they are intended and just...

I already saw that image. I can't follow that image. Like I said, each section the enclosure is divided separately so I can't wire the subs together inside the box. I have to do it outside. Another member of the forum recommended I do this kind of wiring setup outside the enclosure. He said...

Hey Umbra! I have a question for you. Someone sent this to me on another post saying that my 1st wiring diagram that I showed you; where it is daisy chained onto the amp terminals, saying that it's bad. Can you confirm this? If he's right, in this case, I'll just choose the diagram you showed me...

I already have the big 3 upgrade under the hood. And Yeah, I still have my 4G wires from my other setup. I kept all my wires, RCA, Remote Wire, Power Wire, Ground Wire. It's all just hanging in my truck with nothing to bolt to XD. The remote wire though is daisy chained to my frontstage amp. I...

Awesome, Thank you SO SO SO much! That's exactly what I needed to know! So EITHER your wiring diagram OR mine will be corrrect for 2 ohms. I'll just see with my trunk which looks nicer and is easier to conceal the wires. This is the best price I could find with this amp and sub combo. Do you...