Recent content by D_T4m4s

I got it to turn on, and so far everything is working, but I can't get the TV screen to stay open... If I press the "open" button, the screen comes out and turns on but for only 2 seconds, then closes on it's own.

I might have found the issue

Well I couldn't find my multimeter, so I made a test light and this is what I found out... So there are 11 grounds... and If I connect one wire from the light to the "BATT-" labeled solder point on the board and connect the other to one of the pins I marked with a blue minus which are the...

You only need to disassemble the whole unit

Funny.

Here is the connector from the inside. I'm currently looking for my multimeter, I don't know where I left it before :D

I don't want to connect it to the radio harness in my car, I just want to test it with a battery. I can't label the wires until I know which one is which

.

I have a charged 12V car battery that I can use to power the unit with but I don't know where to connect it. I din't have an adapter for this SEVIC head unit, and I couldn't find one online either. I only have an ISO - Sony 16-pin adapter for my current unit I'm using in my car. I only want to...

Hey all, I got this head unit from a friend of mine. I cut off a 16 pin connector from a PC power supply to try to see if it works but I can't really figure out the wiring diagrams. It has 2...

That's the one I've cut off from a PC PSU so the wire colors are completely different from the original harness that came with the unit. If I had the original one, I wouldn't ask here for help :D

Hey all, I got this head unit from a friend of mine. I cut off a 16 pin connector from a PC power supply to try to see if it works but I can't really figure out the wiring diagrams. It has 2 different diagrams; one in its manual and one on the top of the unit. I'd like to know which pin is the...