Recent content by bringitonhome

it could if you have them at or close to max rms power and they are in a large enclosure then chances are you probly need a smaller enclosure try something les porous and bigger like a phone book or something inside the box an see if that helps then let me know and we'll see what else we can...

what are your box dimensions? you might need to reduce the cubic feet inside the box by putting a solid object like a phone book inside.

what kind of subs and amp? is your box sealed well?

can you hear it when your trunk is closed? mine pop when the trunk is open due to lack of back pressure. if you can hear it even when the trunk is closed you probly need to seal your box better. make sure every seem is siliconed and you might try weather stripping around the hole for the sub...

eureka bad ground! thanks for the help

do you remember where in the dash your ran it to i wqas thinking of doing that but couldnt find a good spot thanks

i pressed power didnt press source but i figured power should get me something and wtf is up with the antenna thing

just finished wiring up my clarion head unit to a scoche wiring harness adaptor in my 97 maxima and as soon as i connect the power the antenna goes up but nothing else happens i turn on the car still nothing. no fuses are blown and its wired right blue to blue black to black ect. any idea of my...

would it be considered bad or a fire hazard :-p for me to hook the power wire for my microvision screen to my remote turn on lead? also if i were to hook a cold cathode inverter up in my trunk to highlight my install could i take out my trunk light and attach the neg wire of the cold cathode to...

do i have to worry about running the external bass control wire for my amp by any other wires? thanks john

im running 0 gauge to a fused distro block with 1 zero output and 1 four ga output if i could find one with a 0 ga in and a 0 and 8 out that would be perfect but the best ive been able to come up with is the 1 zero and 1 four outsa with a zero in any fuse recomendations? 250 in line from batt...

yeah im pretty sure i do there is actually 4 sets of rcas but as far as i can tell from the manual other then the front and rear set the others are AUX and head phones also if the 404 manual says to use 8 gauge if i go with 4 is that a problem thanks again john

i have 2 amps an mtx 1501d and an mtx 404 i have a 20' 4 channel rca to run from my deck (clarion) to my 4 channel 404 and now for the question if i run the 4 channel back to the 4 channel amp then can i run a 2 channel from the full range output on my 4 channel amp to the input on my 1501d...