Recent content by breed_corona07

i have it set up to where i can switch back and forth between one 1 and 4 ohms, i kno how to wire everything up pretty good, my ground is like 4ft long, i havent had it at 4 ohms except when i first hooked everything up, and it did the same thing even then, im gonna try it again and see what...

i was thinking that i was at 2ohms( im a dumb a$$) southwest helped me realize that was wrong, it is DVC, its wired at 1ohm, but i have it wired to i can switch between 1 or 4 ohms, the amp has two positive terminals, and two negs, i jus ran a speaker wire from each coil up to amp, and if i...

ok, heres all the controls on my amp and what they are set to, infrasonic filter switch, (0 - 15hz - 25hz) i have it set to 15hz, the phase switch ( 0 - 180) i have it set to 0, the Bass Boost level control ( 0 - 15) i have it set to 5, the LPF freq, i have it set to like 100 hz, and the input...

oh btw, i also wanted to put this out there, im not really a professional at setting all the controls on the amp, im familiar with the input sensitivity and the lp/hp filter switch, but as for any other controls on the amp in jus not sure...

i dunno, im a lil bit worried, although i have seven days if the amps bad i can return it, when i first turn it on, it goes into protect pretty quick, when i try to bump it, but after like five or ten min of lettin it play at a low volume, it starts to work a lil better, it will pound pretty...

im not positive it will work, but i work at radio shack and we sell this deal called a ground loop isolator, it supposed to eleminate electrical noise in audio lines, and its less than twenty buck, here a link http://www.radioshack.com/product/index.jsp?productId=2062214

ok, ill do dat, but i need to wait till i can get ahold of my brothers car its all already set up for a system, in the mean time, someone also told me something about brand new subs, he said that you need to give them time to break in, and he said that might make it go in to protect, oh and the...

ok, the amp is used, i got it off of ebay from a store called dealtree, out of like ten used ones i saw from there it was the best lookin one, it looks like its almost brand new, or barely used, no scratches, scuffs or anything, the sub is brand new from crutchfield and is in a 4 cu. ft. slotted...

ok, so i jus hooked up my new shit, my amp is a 1800(900rms) kenwood (KAC-9104D) >900w at 1ohm, 900w at 2ohms, and 500w at 4ohms(I know, cheezy amp), and my sub is a 15" L7 2 ohm voice coils, brand new, i hooked everthing up, im running it at two ohms now, i tried 1 ohms, but it jus goes into...

lol, ya it was, and ive looked around, and i think i changed my opinion on that amp sale, i dont even think the one on there is a real 1200D, all of the other ones ive seen are different looking, ya, ikesounds sux

i jus found one of these amps refurbished for a buck 40, and i've never used but have heard alot of good things about orion and i jus wanted to know if anyone thinks this is a good deal?, i wanna use it to push an 15" L7

um, those amps were a personal perfered choice, but im really jus lookin for a good amp to push an 15 L7 2ohm DVC, something loud, but good SQ as well

the Kicker SX900.2 and the RF P1000-1bd are the two amps im lookin for but i only have a $200 spending per amp!?!?!?!?!

Can u go any lower on the PDX 1.1000? zip 87901

wat did it do when it shut off, did it smoke or anything, does the light still come on?