Recent content by Aniallation

  1. A

    Amp turns on, but no sound

    Basically all that diagram tells you to do is to make sure the color of the wires coming from your stereo match up with the ones on the wiring harness. If all 4 of your speakers work, you don't have to worry about that diagram. The last part of it says that you can hook up a sub to run off the...
  2. A

    Sub making noise when car turns on.

    Make sure you're getting good ground.
  3. A

    Do i need to upgrade wiring?

    Considering RMS you shouldn't be doing any more than 1500W, you'll be fine with 4AWG as long as it's not an extremely long run.
  4. A

    Amp turns on, but no sound

    Do you have an RCA to 3.5mm cable? If you can get a hold of one, plug the RCA end into your amp's inputs, the 3.5mm end into your phone or an iPod, and play something. If it works and you get bass, you'll know the amps and subs are good, and there's a problem laying in your head unit or the...
  5. A

    Amp turns on, but no sound

    Which Pioneer radio do you have?
  6. A

    Amp turns on, but no sound

    I wouldn't imagine that hooking it up to the wrong set of preouts would make it get no sound at all. Worst case would be hooking it up to the front/rear output rather than the subwoofer output, and getting a full-range signal sent to the amp instead of one with a LPF applied. OP: did you make...
Top