Recent content by Alex Leslie

Okay first of all if you would’ve read those same directions you told me to read and looked at the stock alternator picture I sent then you would see that they don’t apply because there is no plug on the stock alternator. I’m sure people do post on here without reading instructions but you can’t...

Thanks man that helps a lot I’ll definitely look into that. My worry is the new alternator not being compatible with the current voltage regulator and then my voltage is all over the place but I’ll check it out!

Did you read the directions? It’s referring to the stock alternator having a plug to plug into the new adapter which it does not. I obv wouldn’t be on the forum if it was that easy, but thanks for your input.

I am trying to install a high output alternator on my 1996 Jeep Cherokee. The issue i ran into is that the stock alternator has some sort of voltage regulator on it that connects to the pcm to...

I am trying to install a high output alternator on my 1996 Jeep Cherokee. The issue i ran into is that the stock alternator has some sort of voltage regulator on it that connects to the pcm to regulate voltage rather than a 2 prong clip. the new alternator came with a 2 prong clip with 2 wires...

Hey guys, looking to upgrade my amp and would like suggestions on what to get. Trying to spend $500 or less….so I’ll start with my equipment. A few years ago I purchased 2 sundown audio U series 12’s 1500 watts a piece. I got the compact sundown audio SIA-3500 watt amplifier to go with them...

oh yea I literally threw this box together to try and hear these play when I got them but haven’t gotten a new box yet. I cut the top off a old box I had laying around and fabricated the top portion with wood I had laying around I had to make the port mega small to fit the subs in the box I knew...

Thanks man I’ve had it in the trunk before just felt myself needing the space but not now. It’s definitely turned out the box is my main issue.

oh yea I literally threw this box together to try and hear these play when I got them but haven’t gotten a new box yet. I cut the top off a old box I had laying around and fabricated the top portion with wood I had laying around I had to make the port mega small to fit the subs in the box I knew...

okay I’ll look into some 10 or 12 I can definitely fit some 10 gauge tho.

i appreciate that man I knew for a fact I had leakage especially the two empty screw holes and yes the box needs to be better I figured that as soon as I threw it together but thanks for that link and the tips I’ll check that out. Never heard of a glue and screw that’s pretty cool. I have a few...

Here are some pictures. I’d also like to mention I did earlier rewire my subs to 1 ohm. I definitely had it wrong however I had it but it didn’t increase a whole lot of power but definitely noticeably louder they flex a lot better too . I know wiring is messy but this was all supposed to be...