Recent content by 94GMC

That would depend on what you consider amp cords. Are you reffering to RCA cable or Speaker wire? Either way you are best to NOT splice, but you can get away with it. But where the splice is, there isn't going to be the insulation like the rest of the cable/wire and will be subseptable to...

I personally think that as long as you find a RCA Interconnect from a reputable company that has the twisted or braided set up, you should be good. Just be sure to keep your power wires as far away from the RCA's as possible, and it is best to cross any power wire at a 90* angle. Monster Cable...

Thanks for your reply! Yes, that's exactly what i was talking about! What I plan on doing is measuring the OD of the woofer trim ring, and then adding a 1/16"-1/8" to that measurement, and routing the hole out of the top of the enclosure. Then fastening another piece of MDF underneath that hole...

Any help would be appreciated!

Hi everyone! I'm new to this forum! Anyways, I have a few questions that hopefully one of ya'll can help me with! I'm not looking for a ground shaking bass performance, just a nice added thump to pull the entire system together! I'm currently building an enclosure for my 94' Chevy 2500 Extended...