Recent content by 86TaurusHSC

  1. 8

    Am I gonna blow this?

    I just wanted to thank everyone for their help in me choosing my system. Unfortunately on wednesday i had some heart problems and totaled my car going 40, into a power pole. So now i have a system, but i have no car. Oh well thats how it goes, at least i can have a really bassy system on my...
  2. 8

    Am I gonna blow this?

    *BUMP* (sorry)
  3. 8

    Final checklist before building impressive trunk setup

    I used wood glue and screws to make sure everything is tight, then to make 100%sure things are sealed i caulked on the inside of the box wherever panels meet. Yeah the foam or rubber or whatever it is goes around the sub to help it seal up
  4. 8

    Final checklist before building impressive trunk setup

    You probably want to get some good caulk, a caulking gun, acouple of "C" clamps, acouple of those slide clamps for big stuff, some good wood glue, spray adhesive for the carpet (unless you staple it), some gasket material for the subwoofer. You can probably get the plexiglass at home depot or...
  5. 8

    Am I gonna blow this?

    I was reading through the kicker tech manual and it says that "all sealed boxes should be 50% filled with loose polyfil". What does it do?, do i need it? thats probably a dumb question since the manual says you do...... but if the box is 50% filled, isnt it going to get into the subwoofer? or...
  6. 8

    Paint on Epoxy resin

    I was at homedepot today and found some paint on epoxy. It puts a clear hard shell on things like bar tops or tables in restaurants. Do you think that would work well sealing everything up on the inside, or would it crack up the first time you turn the system on? Its about $16 so i didnt want...
  7. 8

    Am I gonna blow this?

    Thanks for the info. I am working on the bracing now, Im using red oak 2x3" strips (i think). Im not sure if this is the best wood to use, but its the only one out of about 7 different woods that either didnt break when i flexed it, or didnt sound like it was going to break. Im doing all the...
  8. 8

    kicker CVR15

    Sweet, thats what i was hoping for. I built myself a really strong ~4.5cf box to put it in. Im planning on putting it at 2ohms to take advantage of the amps 560rms @2 ohms *Drool*
  9. 8

    kicker CVR15

    Anyone have any info on this speaker? i want to pair it with this amp http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3064733490&category=18797
  10. 8

    Audiobahn A1801T good amp?

    Im thinking about getting this amp http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3064733490&category=18797 and pairing it with a CVR15. Good or bad idea? any info on the amp?
  11. 8

    Am I gonna blow this?

    Im putting together a system with an Audiobahn A1801T (1000peak, 560rms @2ohms) with one Kicker CVR15 (1000 peak, 500rms @ 2 ohms). I built a box yesterday measuring 26x20x16 yielding ~4.8 cf. The min for this speaker is 1.8 and the max is 5.0cf. I do have alot of bracing on the inside, so it...
Top