Make sure you put them in a baby box ported... //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Joe Tama is my porn name. //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif
I am Joe Tama!!!
So, what do you want my help with?
I wouldn't personally use the XT25 or that woofer (having bad flashbacks to the XXX Mid-woofer). Some people bloody love the XT25, NG is one of them but personally it doesn't fit my tastes. But, always build a system around your tweeter. Woofers are a dime a dozen and personally the RS-180 from Dayton is a design favorite of mine because it is rather versatile and pretty forgiving with a simple crossover.
Depending on the drives I don't design much out of 2nd order with an L-Pad. (I prefer first order with a hybrid second order, but I rarely get that lucky) A decent driver should be usable without a zoble network (blastfamy i know, but I don't really care. Personally I've tried my X-Over designs with and without and mostly I prefer without, plus I don't measure FR of my designs except for a few basic point. My ear will be listening 99.999% of the time so I don't really care what a graph says. Plus I don't have an anechoic chamber so I really can't measure FR accuratly anyway. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif)
Anyway, in all seriousness if you want to go XT-25 I know of a few decent mids you could go with, but you'll probably have to pad the **** out of the tweeter since those **** RDR are so sensitive.
I know this post wasn't really much help at all, but I'm not really apt to design something for someone else unless they are a close friend of mine. I also end up keeping most of my desings a bit of a secret because I put lots of time and effort into the design process & I'm a dick and don't want others to enjoy my work. //content.invisioncic.com/y282845/emoticons/woot.gif.aaa6090e619a97b6090d16dd863c5a69.gif