Sync volumes Pioneer DMH-2660NEX

  • 1
    Participant count
  • Participant list

HnyBear

CarAudio.com Newbie
How do I link the guidance and music volume so they raise and lower together? I have my guidance set to 22 which is fine while driving with my music volume at 16 usually. However when I turn the music down to like 6 the guidance volume is still at 22 which is far too loud when at a stop or early in the morning when trying to be quiet. There has to be a way to sync the volumes so they raise and lower together. Having to constantly touch the screen to adjust guidance volume while driving is dangerous.

Any help is much appreciated.
 
Activity
No one is currently typing a reply...

Similar threads

Hi crew! I’m reaching out for some help. I have a 2011 Fiesta SES and have all the parts needed for a conversion to Sync 3 except the harness...
0
1K
Should be wired as shown to a final 2 ohm load for that amp, Check your wiring configuration...
10
2K
@1aespinoza I see, so this audio volume leveling is what I was experiencing tapping into the Bose sub wires. Well then, I'm off to check out the...
4
1K
I would pull the HU and bench test it. Can be done with a 12v battery on a non-metal work bench easily enough.
16
2K
And who doesn't do that? A lot of companies do that. I know that Skar copies a lot of Sundown stuff and he used to be over there. I just thought...
10
2K

About this thread

HnyBear

CarAudio.com Newbie
Thread starter
HnyBear
Joined
Location
Winter Haven, FL
Start date
Participants
Who Replied
Replies
0
Views
2,053
Last reply date
Last reply from
HnyBear
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top