Sub stopped working after spearer replacement.

  • 2
    Participant count
  • Participant list

Badataudio

CarAudio.com Newbie
1
0
Tx
I replaced my old oem front door speakers in my car with some kickers and 2 days later my subwoofer and rear speakers stopped working. It looks like it's still getting power and the fuse didn't look blown. The next day I tried turning it on and it worked for a day but now stopped working again. The sub is a nakamichi 8 in and at least 4yrs old. Any ideas.
 
I replaced my old oem front door speakers in my car with some kickers and 2 days later my subwoofer and rear speakers stopped working. It looks like it's still getting power and the fuse didn't look blown. The next day I tried turning it on and it worked for a day but now stopped working again. The sub is a nakamichi 8 in and at least 4yrs old. Any ideas.
If you still have the old speakers, put them in and see what happens.
 
Activity
No one is currently typing a reply...

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
233
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
554
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
586

About this thread

Badataudio

CarAudio.com Newbie
Thread starter
Badataudio
Joined
Location
Tx
Start date
Participants
Who Replied
Replies
1
Views
1,254
Last reply date
Last reply from
1aespinoza
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top