Sub options for small setup

[rickdog67]

I just purchased a Sonata Turbo and was wanting to put some extra low end in the trunk. I found a setup that I like to keep my trunk space and gives me a modest 1.66 cu ft to work with. I figured I'm pretty limited with that.Subwoofer Box Dimensions - Page 2 - Hyundai Forums : Hyundai Forum. I've done a fair amount of research so far. I have about 500 watts to work with from an EL1500 but could upgrade some. I'm not running larger than 4 gauge wire nor considering another battery in the trunk. This is strictly simple. I've looked at a single E12, Q Power deluxe, Pioneer Champion Pro, Sound Qubed, Type R, etc. I figured a ported 12" would have a lower response then say 2 10s, but I was looking for opinions. Total for sub shouldn't be more than 150ish. I have other interests too. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Click to read more...

 

[LosIsATool 5,000+ posts]

2 10s will have more output all things equal but with your $150 cap you're better off with 1 12 or even 1 15

 

[rickdog67]

I looked for a single 15, but didn't see anything that would like 1.5cuft net space. Also, it looks like I would have to get really creative with the enclosure, as it only has 14 in height. The trunk space is only about 14.5in tall towards the front.

 

[LosIsATool 5,000+ posts]

Most 12s are not going to like 1.5.

 

[rickdog67]

So I've noticed. The type R and the Pioneer seem to fit, as well as the E12 from Sundown. ALso, I suppose it would be comparing 2 sealed 10" to one 12" ported. Unless there's a decent 10" that can go ported at 0.75cu.

 

[LosIsATool 5,000+ posts]

They don't fit. 1.75 is the minimum. They will do it but sound very pesky and top heavy. Now a 10 in 1.5 will small

 

[rickdog67]

So you're thinking no 12" would play well in that 1.5 ported?

 

[trumpet 5,000+ posts]

JBL GTO1214 would do very well. The recommended vented enclosure is 1.75 cubes with a 4" x 10" round port. The enclosure Fb is 34 Hz.

 

[JDBoogie 10+ year member]

An IDQ 12 (V3) Only requires 1 cuft and can even go down to .88 (if i remember correctly) for a small enclosure.

 

[LosIsATool 5,000+ posts]

An IDQ 12 (V3) Only requires 1 cuft and can even go down to .88 (if i remember correctly) for a small enclosure.

Ported?

 

[JDBoogie 10+ year member]

1.5 cuft 30Hz or small enclosure 1.2 cuft 34Hz

 

[fasfocus00 5,000+ posts]

a Kicker CompR 10 would do really well in that volume as well as an Alpine Type S (i got a brand new one just chillin' in the garage, pm me if interested). DC subs like smaller enclosures, the Level 2 is right that alley too.

 

[rickdog67]

Good options, the DC is a little pricey, I'm sure it's worth it though. The Dayton Audio RSS315HO-44 12" Reference HO DVC Subwoofer also appears to fit the bill.