palvaro
CarAudio.com Newbie
This is a stupid question but I just wanted to make sure as I've read conflicting information. I built a sealed box for my infinity Kappa sub. I am wired up and ready to finish up by screwing in the sub. I have 1" screws that came with the sub but I used 3/4" mdf for the box. Is it ok to use the 1" screws even though they will pierce through the mdf or should I go get slightly smaller screws that won't go all the way through?
I've read some installers talk about how it's not an issue and to just pilot and screw through while others have said that it will create an issue for the sealed box as air could escape through the screw holes possible resulting in a whistle. Any thoughts or help with this would be greatly appreciated as it's my first box and I'd rather not screw it up on the final step. Thanks
I've read some installers talk about how it's not an issue and to just pilot and screw through while others have said that it will create an issue for the sealed box as air could escape through the screw holes possible resulting in a whistle. Any thoughts or help with this would be greatly appreciated as it's my first box and I'd rather not screw it up on the final step. Thanks
Last edited: