93foxwcubes
Junior Member
Ok so im having a difficult time finding out how to design a ported box for my sub.
Here's what i have.
10" sundown sa
Total space is something like 2.60f3 before displacement.
It's a small compartment behind my seat in a freightliner classic (semi truck)
I believe the compartment is for a small fridge.
I have a ported probox at the moment in place which takes up a little more than half of the compartment . Box before displacement is 1.25 i think...
The box sounds good and loud for one ten sa. But i got bit by the bass bug.. Again and want more. Ive always had 15" subs. From fosgates to orion ti kicker solo B. Always 15"s. At one point 4 of them on 2 old school xtr orion amps two channel. (that was a while back)
Back on the subject. I want to fit either a bigger ported box to get the full potential out of the sa (probox is 1.25f3 with square 2x2 port, length??) or build a sealed enclosure with 2 sa 10"s. Its one or the other. The sealed box would give each woofer 1.2f3. These are the dimensions i have to work with.
22" height
18" length (deep)
16" wide
I can build a duel sealed box but i really like the ported box sound and would like to keep it. I could have someone build it right.... but id rather spend the money on owning a second sundown sa ans build my own sealed box.
Any advice, (spec sheet desing) will be greatly appreciated and put to work immediately. I have my tools and 3/4 mdf on standby.
Thanks
P.S
Rest of the audio is pioneer hu, infinity kappa 6.5 components, Kenwood 4 channel, ct sounds 1400.1, kinetik HC1200.
Here's what i have.
10" sundown sa
Total space is something like 2.60f3 before displacement.
It's a small compartment behind my seat in a freightliner classic (semi truck)
I believe the compartment is for a small fridge.
I have a ported probox at the moment in place which takes up a little more than half of the compartment . Box before displacement is 1.25 i think...
The box sounds good and loud for one ten sa. But i got bit by the bass bug.. Again and want more. Ive always had 15" subs. From fosgates to orion ti kicker solo B. Always 15"s. At one point 4 of them on 2 old school xtr orion amps two channel. (that was a while back)
Back on the subject. I want to fit either a bigger ported box to get the full potential out of the sa (probox is 1.25f3 with square 2x2 port, length??) or build a sealed enclosure with 2 sa 10"s. Its one or the other. The sealed box would give each woofer 1.2f3. These are the dimensions i have to work with.
22" height
18" length (deep)
16" wide
I can build a duel sealed box but i really like the ported box sound and would like to keep it. I could have someone build it right.... but id rather spend the money on owning a second sundown sa ans build my own sealed box.
Any advice, (spec sheet desing) will be greatly appreciated and put to work immediately. I have my tools and 3/4 mdf on standby.
Thanks
P.S
Rest of the audio is pioneer hu, infinity kappa 6.5 components, Kenwood 4 channel, ct sounds 1400.1, kinetik HC1200.